Phoenix goods Urethane Bandsaw Tires 3 Pack for 3 wheel 10 Inch 14 Inch Band Saws No Adhesive Needed Phoenix goods

Urethane Band saw Tires 6 x 38 x 095 3 pack Fit for Craftsman Band Saw Models 133244510 113244512 113244513 How to install First After disassembling old tires clean up the gummy debris left on the wheels Mounting Used a clamp to hold the tire on the wheel in one spot and then used a screwdriver to pry the rest of the tire on This made installation relatively easy Uniform stretch After mounting removed the clamp and pushed the shaft of the screwdriver completely under the tire so it was between the tire and rim Then ran the screwdriver around the wheel several times to make sure the tire was uniformly stretched around the wheel Seating the tire Next made sure the tires were properly seated in the groove on the wheels rolled the wheel on a concrete floor pushing down pretty hard with your hands so the concrete would forced the tire into the groove After mounting reinstalled the wheels and readjusted everything finish Urethane band saw tires no adhesive needed but need to be stretched on If your new band saw tire is too tight to fit onto the wheel submerged the new tire under hot water for a few minutes this will make things easier